您所在位置:首页 > 产品中心 > 电气及电气自动化 > 仪器仪表 > 德国ZIMMER电力仪表 高电流宽带交流测量变压器 精密宽带高压分压器
  • 德国ZIMMER电力仪表  高电流宽带交流测量变压器  精密宽带高压分压器
  • 德国ZIMMER电力仪表  高电流宽带交流测量变压器  精密宽带高压分压器
  • 德国ZIMMER电力仪表  高电流宽带交流测量变压器  精密宽带高压分压器
  • 德国ZIMMER电力仪表  高电流宽带交流测量变压器  精密宽带高压分压器

德国ZIMMER电力仪表 高电流宽带交流测量变压器 精密宽带高压分压器

  • 英文名称:Zimmer
  • 品牌名称:Zimmer
  • 原产国家:德国
性能特点
申明:东莞凌圣作为拥有进出口资质以及德国实体公司的贸易公司诚意提供以下产品,但是我们绝非此品牌在中国的办事处,分公司或者总代理。请和我们一起坚守诚信经营,互利共赢,拒绝虚假宣传!
Power- and energy metering, energy management and process control in buildings and plants
Multifunctional - All electrical values for power consumption
Per phase and totals of kW, kvar, V, A, PF (power factor)
Backlighted displays
High accuracies 0,2%
Alarm outputs, analog outputs
PC Interfaces RS422/485 or RS232
实物照片

HST3精密宽带高压分压器

HST3精密宽带高压分压器

WCT高电流宽带交流测量变压器

WCT高电流宽带交流测量变压器

电力仪表EZI1

电力仪表LMG310

电力仪表PM3XX-RM3XX

电力仪表TM396
规格型号
Energy and Power Meter
Typical Applications:
Power- and energy metering, energy management and process control in buildings and plants
Multifunctional - All electrical values for power consumption
Per phase and totals of kW, kvar, V, A, PF (power factor)
Backlighted displays
High accuracies 0,2%
Alarm outputs, analog outputs
PC Interfaces RS422/485 or RS232

LMG310
3-Phase Precision Power Analyzer
Product description(产品描述)
Basic Accuracy 0.05% Wide Bandwidth DC to 1MHz
Motors, Inverters, Transformers
Harmonics and Flicker according to IEC61000-3
General, application fields
Precision power measuring – this associates to the ZES ZIMMER power multimeter series,
? LMG90 and LMG95 for monophase
? LMG310 and LMG450 for multiphase measurements.
Both series are successful, approved and kept state of the art by continuous and steady research and development by the ZES ZIMMER engineering staff. Due to its high sampling rate, simultaneous for all channels, the LMG310 is capable of performing extremely accurate measurements of power and energy in symmetrical and non-symmetrical 3-phase systems with any load and signals with frequencies from DC to 1MHz. The wideband fully floating isolated inputs have a high immunity against electrical disturbances and a very high dynamic common-mode rejection, and feature wide measuring ranges: for current directly from 3mA to 30A, for voltage directly from 1V to 1000V. Measuring inputs for external
shunt voltages extend the measuring ranges for the current in any way. This design of the wideband measuring inputs and the processing in real time with digital signal processors give reason for the preferred use of the LMG310 in measuring applications of pulsed power electronics (also at PWM-converters). The LMG310 is used in the fields of development, manufacturing and quality control. There the simultaneous threephase measurement of active power loss in reactive and nonlinear components like transformers, chokes, motors, capacitors is required; the power consumption and efficiency of power supplies, electrical lamp ballasts and inverters have to be specified. Analysis of harmonics including the limit check of the harmonics according IEC61000-3-2 (classes A, B, C and D), the flicker measuring according IEC61000-3-3 and transient recording and monitoring are available options of the LMG310. These three options
are used to evaluate the power line disturbances which may be emitted by electrical devices, further to analyse the quality of supplied power in the mains. The option to measure the loss power or transformers (transformer version) serves to measure the losses at very low cosj (<0.01) with an error <0.006% related to the power range. By means of the integrated formula editor all measured and calculated quantities as well as the signals of the processing signal interface (option) can be computed to new quantities and displayed on the screen. The time diagrams of the signals of the screen in real time (option scope-/plot function) is another powerful feature of the instrument. Driver for modern instrumentation and evaluation software like LabVIEW? are available as well as user programmes built and compiled by means of these software tools. When connecting the LMG310 with a PC you easily can build measuring systems, motor and other test systems.
Easy to use
The high-resolution screen with the status line for input levels, cycle time and synchronization, the 10 softkeys on the bottom and right margin of the screen and the 15 menu keys for access to important menus provide a clear, simple
and intuitively comprehensible operation of the instrument. To indicate the desired information, it is normally sufficient to press just one key. Menus for the instrument setup (configurations) as well as menus defined by the user for measuring values display can be stored and recalled when needed.
Interference immunity, dynamic common-mode rejection
The LMG310 has a high interference immunity, which is defined according IEC61000 (e.g. bursts up to 4kV on all measuring and supply-inputs) and widely exceeds the standards. In addition the excellent common- mode rejection of the instrument ensures the correct sampling and computing of measuring values even for measuring arrangements floating against earth with high frequencies (>100kHz), voltages up to 1000V and high slew rates (>20kV/μs).
Measuring circuits
The LMG310 is suitable for all measurements of 1-, 2- and 3- phase systems. The measuring channels can be used independently. When using the option star/delta conversion the input signals applied as phase and/or linked values will be evaluated according their wiring (current/ voltage as ; ; ; ) and will be transformed. In the figure the use of the softkey ′LINKED VALUES′ has activated a menu with the phase values (index 1p, 2p, 3p) and the linked values (index 12, 23, 31) for current, voltage and power. The magnitude physically applied to the measuring channel and directly measured is indexed with one digit only (index 1, 2, 3), as you see in the measuring value display on the front page. The measurement with Aron measuring circuit (3-phase with 2 measuring channels) is also supported, so that the third measuring channel is available for additional measurements.
Measuring inputs, measuring accuracy
The measuring error (as sum of the percentages of reading and measuring range) for current and voltage is <1% valid for the whole precision range from DC to 400kHz. The basic accuracy is 0.05%. This accuracy is valid for all current and voltage measuring ranges (3mA-30A, 1V-1000V)! Above the 400kHz precision range measurements with high accuracy are also possible because of 1MHz bandwidth of the input channels. The measuring accuracy will be decreased by the derating, starting at 400kHz. Commonmode signals in the precision range up to 400kHz have nearly no influence to the measuring results. The measuring inputs for external shunt voltages with the ranges 15, 50, 150mV enlarge the measurements for currents. In all current and voltage measuring ranges the LMG310 is capable of measuring up to the double nominal value, max. 60Apeak and 2000Vpeak.

PM3XX / RM3XX
Electronic Power- and Energy Meters for Panel and Rail Mounting
Product description(产品描述)
1 to 3 Phases
Power- and energy metering, energy management and process control in buildings and plants
1).Multifunctional - All electrical values for power consumption
2).Per phase and totals of kW, kvar, V, A, PF (power factor)
3).Backlighted displays
4).High accuracies 0.2%
5).Alarm outputs, analog outputs
6).PC Interfaces RS422/485 or RS232

EZI1
Monophase Wide-range Energy Meter
Product description
High Precision (0.1% of measuring value)
Pulse and Analogue Output

General:
EZI1 is an electronic transducer for the exact measurement of power and energy at a high input range for current (0.25A...25A) and voltage (86V...254V). The accuracy of the measuring value is 0.1%, in the range 0.02A to 0.25A it is 0.5%. The pulse output of the standard version is designed for 25 pulses per watt-hour (1 pulse for 144 Ws). Due to the wide measuring range, the transducer has a higher resolution and accuracy than common induction meters. The analogue output (0...10VDC) can be set to full scale values in the range 100...3600W by the manufacturer. All inputs and outputs such as current path, voltage path, pulse output, analogue output and auxiliary supply are isolated against each other (test voltage 3kVtrms). This simplifies the system design and allows easy integration of the EZI1 into measuring data recording and control systems.
Application:
Due to its accuracy and high resolution, the monophase energy meter EZI1 is capable of determining the energy consumption of all kinds of devices. It is especially suited for applications where measuring values have to be picked up for different operating conditions at short measuring times, as in quality control and production. When measuring motors with high starting currents and many on-off switching cycles, the starting peak values will influence the total consumption considerably. Examples for such applications are compressors for refrigerators and oil-burner motors. In these cases, the EZI1 with its wide current range and high accuracy is the ideal measuring instrument for the exact determination of power and energy.

HST
Precision Wideband High Voltage Divider
Product description(产品描述)
Precision Wideband High Voltage Divider HST
The wide band precision high voltage divider of series HST expand the voltage measuring range of ZES ZIMMER precision power meter LMG for use at nominal voltages over 1000V. The high voltage inputs are equipped with 2m leads that are attached to the voltage measured against earth. The open leads can be finished by the customer. The HST3 (resp. HST6/9/12) divides DC, AC or any distorted voltages with very high accuracy by the factor 1000 (resp. 2000/3000/4000). The divided voltage is available at the buffered low impedance BNC output. To avoid noise interference it is recommended to use shielded cables to the measuring input of the LMG. The HST can be delivered as one-, two- or three-channel version to match the particular measuring task.
Not for measurements directly on the grid!
Standard Accessories:
3m BNC connection cable
Adapter BNC -> 4mm security plugs
Versions:
HST3-1 1 Channel, max. 4.2kVeff, divider ratio 1000, WxHxD 330x230x110 mm
HST3-2 2 Channel, max. 4.2kVeff, divider ratio 1000, WxHxD 330x230x110 mm
HST3-3 3 Channel, max. 4.2kVeff, divider ratio 1000, WxHxD 330x230x110 mm
HST6-1 1 Channel, max. 8.4kVeff, divider ratio 2000, WxHxD 330x230x110 mm
HST6-2 2 Channel, max. 8.4kVeff, divider ratio 2000, WxHxD 330x230x110 mm
HST6-3 3 Channel, max. 8.4kVeff, divider ratio 2000, WxHxD 330x230x110 mm
HST9-1 1 Channel, max 12.6kVeff, divider ratio 3000, WxHxD 400x230x110 mm
HST9-2 2 Channel, max 12.6kVeff, divider ratio 3000, WxHxD 400x230x110 mm
HST9-3 3 Channel, max 12.6kVeff, divider ratio 3000, WxHxD 400x230x110 mm
HST12-1 1 Channel, max 16.8kVeff, divider ratio 4000, WxHxD 400x230x110 mm
HST12-2 2 Channel, max 16.8kVeff, divider ratio 4000, WxHxD 400x230x110 mm
HST12-3 3 Channel, max 16.8kVeff, divider ratio 4000, WxHxD 400x230x110 mm

WCT
High Current Wideband AC Measuring Transformer
Product description
Measuring power electronics at medium and high frequencies
Applications:
Plasma excitation
Laser excitation
Ultrasonic excitation
Induction heating
Induction cooking
High speed spindles
Avionic power supplies (including harmonic analysis up to 150kHz)
CE-Harmonic analysis over 16A (e.g. EN61000-3-12)
Precise measurement of high currents 100A and 1000 A
Best accuracy 0,25%
For middle and high frequencies 30Hz to 1 MHz
Approved and adapted to expand precision power measuring ranges of ZES ZIMMER? LMG series
Versions:
LMG-Z601 WCT100 100A/1A, 30Hz - 1MHz
LMG-Z602 WCT1000 1000A/1A, 30Hz - 1MHz
公司实力
企业介绍
凌圣公司实力

德国凌圣科技有限公司(LSPTC GmbH),专注为中国制造业提供德国及欧盟原装进口工业品配件、技术支持和解决方案,是德国工业品直购中国第1品牌,拥有近15年的工业品配件供应、技术支持与解决方案提供经验。

LSPTC GmbH 在德国法兰克福(Frankfurt Main)成立, 在德国建立并拥有专业的技术支持团队、采购团队和仓储物流中心。与德国超过1000家以上的工业品原产商建立合作或代理关系,供应超过3000种以上德国本土工业品品牌,涵盖4大工业品核心领域:1、机械动力与工具【电机减速机、伺服与驱动器、刹车离合器、制动器、链条、工具等】;2、液体及过滤装置【液压与气动、泵、阀、过滤器等】;3、电气及电气自动化【电容电位器、控制器与继电器、仪器仪表、传感器与编码器、电源与模块】;4、设备及零部件【接头与端子、标准件、刀具夹具等】,形成了拥有超过105000种高质量产品的供应规模。

LSPTC在中国四大核心区域建立子公司、服务团队、仓储中心,并拥有高效且稳定的ERP系统支持,因此在LSPTC,客户可以一站式地采购企业所需的所有产品和解决方案,并且快速安全的送达。

服务网络
凌圣公司实力
成功客户

广泛的产品选择、高品质的产品和可靠的服务,以及交货迅速和价格合理等特色,使凌圣满足了许多客户在生产和物流业务等方面的多种需要。目前,凌圣在中国已经服务了上万个客户,不仅在中国的大多数跨国公司已成为凌圣的顾客,众多国内公司也愈益体会到直接向凌圣订购产品的便利!

  • 百事可乐
  • 宝钢集团
  • 富士康集团
  • 加多宝集团
  • 洁柔
  • 三一重工
  • 天津一汽
  • 盐田港集团
  • 中国海油
  • 中粮集团
  • Nestle
  • 广州本田
服务承诺
  • 免费送货

    客户只需支付产品价格,无需支付任何其它费用,如包装费或费运,且不设小起订量。
  • 质量保证

    凌圣所有产品提供至少1年质量保证,凌圣自有品牌可提供3年以上质量保证。
  • 30天退还

    假如某些产品不符合需求,在保证外包装完整的前提下,凌圣将安排退货并且快速发货。
  • 正品保证

    凌圣所有提供的产品均拥有进品报送资料和原产品证明,保证100%正品。
在线询价
  • 询价标题:
  • 公司名称:
  • 联  系 人:
  • 手  机 号:
  • 电子邮件:
  • 公司地址:
详细内容:
COPYRIGHT © 2010-2014  东莞市凌圣五金机电有限公司  版权所有  粤ICP备12049316号-1
申明:东莞凌圣作为拥有进出口资质以及德国实体公司的贸易公司诚意提供以上产品,但是我们绝非此品牌在中国的办事处,分公司或者总代理。请和我们一起坚守诚信经营,互利共赢,拒绝虚假宣传!